How a tire repairer / changer can use AI, task by task

I work as a tire repairer / changer. Part of my job is to unbolt and remove wheels from vehicles, using lug wrenches or other hand or power tools.

Context: The work draws on mechanical, production and processing and customer and personal service.
Vehicle: [make, model, year]
What comes out: [seats, trim, carpet, door panels]

List removal order, fasteners and clips to watch for, how to label and store parts, and battery or airbag precautions.

I work as a tire repairer / changer. Part of my job is to raise vehicles, using hydraulic jacks.

Context: The work draws on mechanical, production and processing and customer and personal service.
Load: [weight, dimensions]
Equipment: [crane, hoist, rigging]

List pre-lift checks, signals, path and landing. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to identify tire size and ply and inflate tires accordingly.

Context: The work draws on mechanical, production and processing and customer and personal service.
Vehicle or boat: [make, model]
Service: [oil change, lube, filters]

List steps, fluids and specs to look up. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to reassemble tires onto wheels.

Context: The work draws on mechanical, production and processing and customer and personal service.
Equipment: [machine, motor]
Repair done: [describe]

List reassembly order, torque values to look up, and tests. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to place wheels on balancing machines to determine counterweights required to balance wheels.

Context: The work draws on mechanical, production and processing and customer and personal service.
Equipment: [describe]
Checks: [speed, temperature, operation]

List tests and limits. Group it by area, say what 'good' and 'bad' look like for each item, and add a short template for writing up what I find.

I work as a tire repairer / changer. Part of my job is to remount wheels onto vehicles.

Context: The work draws on mechanical, production and processing and customer and personal service.
Vehicle: [make, model]
Part: [window, trim, fuel system part]

List installation steps and checks. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to hammer required counterweights onto rims of wheels.

Context: The work draws on mechanical, production and processing and customer and personal service.
Machine: [describe]
Specs: [tolerances]

List assembly steps and measurements. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to replace valve stems and remove puncturing objects.

Context: The work draws on mechanical, production and processing and customer and personal service.
Tire: [type, damage]
Rules: [repairable areas]

List inspection, repair and mounting steps. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to rotate tires to different positions on vehicles, using hand tools.

Context: The work draws on mechanical, production and processing and customer and personal service.
Vehicle: [make, model]
Part: [window, trim, fuel system part]

List installation steps and checks. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to seal punctures in tubeless tires by inserting adhesive material and expanding rubber plugs into punctures, using hand tools.

Context: The work draws on mechanical, production and processing and customer and personal service.
Tire: [type, damage]
Rules: [repairable areas]

List inspection, repair and mounting steps. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to locate punctures in tubeless tires by visual inspection or by immersing inflated tires in water baths and observing air bubbles.

Context: The work draws on mechanical, production and processing and customer and personal service.
Vehicle or aircraft: [type]
Inspection type: [routine, damage, regulatory]

List systems to inspect in order, what wear or damage looks like, measurements to take, and a findings template.

I work as a tire repairer / changer. Part of my job is to glue tire patches over ruptures in tire casings, using rubber cement.

Context: The work draws on mechanical, production and processing and customer and personal service.
Tire: [type, damage]
Rules: [repairable areas]

List inspection, repair and mounting steps. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to inspect tire casings for defects, such as holes or tears.

Context: The work draws on mechanical, production and processing and customer and personal service.
Vehicle or aircraft: [type]
Inspection type: [routine, damage, regulatory]

List systems to inspect in order, what wear or damage looks like, measurements to take, and a findings template.

I work as a tire repairer / changer. Part of my job is to clean and tidy up the shop.

Context: The work draws on mechanical, production and processing and customer and personal service.
Area: [booth, prep room, workspace]
Requirements: [standards, hazards]

Make an end-of-shift checklist. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to buff defective areas of inner tubes, using scrapers.

Context: The work draws on mechanical, production and processing and customer and personal service.
Surface: [commutator, filled area]
Specs: [finish]

List tools and steps. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to apply rubber cement to buffed tire casings prior to vulcanization process.

Context: The work draws on mechanical, production and processing and customer and personal service.
Tire: [type, damage]
Rules: [repairable areas]

List inspection, repair and mounting steps. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to patch tubes with adhesive rubber patches or seal rubber patches to tubes, using hot vulcanizing plates.

Context: The work draws on mechanical, production and processing and customer and personal service.
Tire: [type, damage]
Rules: [repairable areas]

List inspection, repair and mounting steps. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to prepare rims and wheel drums for reassembly by scraping, grinding, or sandblasting.

Context: The work draws on mechanical, production and processing and customer and personal service.
Surface: [commutator, filled area]
Specs: [finish]

List tools and steps. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to separate tubed tires from wheels, using rubber mallets and metal bars or mechanical tire changers.

Context: The work draws on mechanical, production and processing and customer and personal service.
Equipment: [motor, lighting rig, machine]
Fault or purpose: [describe]

List a teardown sequence, how to tag and bag parts, what to inspect as each part comes off, and safety steps.

I work as a tire repairer / changer. Part of my job is to assist mechanics and perform various mechanical duties, such as changing oil or checking and replacing batteries.

Context: The work draws on mechanical, production and processing and customer and personal service.
Vehicle or boat: [make, model]
Service: [oil change, lube, filters]

List steps, fluids and specs to look up. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to inflate inner tubes and immerse them in water to locate leaks.

Context: The work draws on mechanical, production and processing and customer and personal service.
Vehicle or aircraft: [type]
Inspection type: [routine, damage, regulatory]

List systems to inspect in order, what wear or damage looks like, measurements to take, and a findings template.

I work as a tire repairer / changer. Part of my job is to drive automobile or service trucks to industrial sites to provide services or respond to emergency calls.

Context: The work draws on mechanical, production and processing and customer and personal service.
Vehicle: [van, truck]
Route: [sites]

List checks and safe driving points. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to clean sides of whitewall tires.

Context: The work draws on mechanical, production and processing and customer and personal service.
Equipment: [instruments, lab gear, tools]
Manual guidance: [cleaning and maintenance steps]

Make a maintenance checklist and log. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as a tire repairer / changer. Part of my job is to place tire casings and tread rubber assemblies in tire molds for the vulcanization process and exert pressure to ensure good adhesion.

Context: The work draws on mechanical, production and processing and customer and personal service.
Mold and material: [tire, clay, casting]
Specs: [amounts]

List loading and tamping steps. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.