How an electric motor / power tool / related repairer can use AI, task by task

I work as an electric motor / power tool / related repairer. Part of my job is to lift units or parts such as motors or generators, using cranes or chain hoists, or signal crane operators to lift heavy parts or subassemblies.

Context: The work draws on mechanical, production and processing and administration and management.
Load: [weight, dimensions]
Equipment: [crane, hoist, rigging]

List pre-lift checks, signals, path and landing. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to disassemble defective equipment so that repairs can be made, using hand tools.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [motor, lighting rig, machine]
Fault or purpose: [describe]

List a teardown sequence, how to tag and bag parts, what to inspect as each part comes off, and safety steps.

I work as an electric motor / power tool / related repairer. Part of my job is to adjust working parts, such as fan belts, contacts, and springs, using hand tools and gauges.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [radio, antenna, machine]
Targets: [specs]

List adjustment steps and measurements. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to measure velocity, horsepower, revolutions per minute (rpm), amperage, circuitry, and voltage of units or parts to diagnose problems, using ammeters, voltmeters, wattmeters, and other testing devices.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [motor, engine, vehicle]
Measurements: [rpm, voltage, emissions]

List how to measure and acceptable ranges. Group it by area, say what 'good' and 'bad' look like for each item, and add a short template for writing up what I find.

I work as an electric motor / power tool / related repairer. Part of my job is to scrape and clean units or parts, using cleaning solvents and equipment such as buffing wheels.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [instruments, lab gear, tools]
Manual guidance: [cleaning and maintenance steps]

Make a maintenance checklist and log. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to reassemble repaired electric motors to specified requirements and ratings, using hand tools and electrical meters.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [machine, motor]
Repair done: [describe]

List reassembly order, torque values to look up, and tests. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to lubricate moving parts.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [describe]
Lubricants: [types, points]

List lube points, amounts and intervals. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to repair and rebuild defective mechanical parts in electric motors, generators, and related equipment, using hand tools and power tools.

Context: The work draws on mechanical, production and processing and administration and management.
Part: [crankshaft, motor, block]
Condition: [describe]

List rebuild steps and measurements. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to inspect electrical connections, wiring, relays, charging resistance boxes, and storage batteries, following wiring diagrams.

Context: The work draws on mechanical, production and processing and administration and management.
System: [panel, PV array, wiring]
Codes: [electrical code]

Make an inspection checklist: wiring, polarity, grounding, terminations. Group it by area, say what 'good' and 'bad' look like for each item, and add a short template for writing up what I find.

I work as an electric motor / power tool / related repairer. Part of my job is to verify and adjust alignments and dimensions of parts, using gauges and tracing lathes.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [radio, antenna, machine]
Targets: [specs]

List adjustment steps and measurements. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to weld, braze, or solder electrical connections.

Context: The work draws on mechanical, production and processing and administration and management.
Joint: [copper, HVAC, electrical]
Filler: [type]

List cleaning, heating and purge steps. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to set machinery for proper performance, using computers.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [radio, antenna, machine]
Targets: [specs]

List adjustment steps and measurements. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to rewire electrical systems, and repair or replace electrical accessories.

Context: The work draws on mechanical, production and processing and administration and management.
System: [circuit, motor, telecom]
Change: [work order, diagram]

List steps, lockout and tests. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to test equipment for overheating, using speed gauges and thermometers.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [describe]
Checks: [speed, temperature, operation]

List tests and limits. Group it by area, say what 'good' and 'bad' look like for each item, and add a short template for writing up what I find.

I work as an electric motor / power tool / related repairer. Part of my job is to solder, wrap, and coat wires to ensure proper insulation.

Context: The work draws on mechanical, production and processing and administration and management.
Repair: [circuit, wire]
Components: [describe]

List steps and insulation checks. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to assemble electrical parts such as alternators, generators, starting devices, and switches, following schematic drawings and using hand, machine, and power tools.

Context: The work draws on mechanical, production and processing and administration and management.
Subsystem: [switches, junction boxes, comms]
Diagrams: [describe]

List assembly and continuity checks. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to steam-clean polishing and buffing wheels to remove abrasives and bonding materials, and spray, brush, or recoat surfaces as necessary.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [instruments, lab gear, tools]
Manual guidance: [cleaning and maintenance steps]

Make a maintenance checklist and log. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to hammer out dents and twists in tools and equipment.

Context: The work draws on mechanical, production and processing and administration and management.
Item: [panel, tool]
Dent: [size, location]

List technique and tools. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to cut and form insulation, and insert insulation into armature, rotor, or stator slots.

Context: The work draws on mechanical, production and processing and administration and management.
Insulation: [batts, blown, pipe, board]
Area: [walls, attic, equipment]
Target: [R-value, code]

Estimate quantities, list installation steps, vapour barrier placement and PPE. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to reface, ream, and polish commutators and machine parts to specified tolerances, using machine tools.

Context: The work draws on mechanical, production and processing and administration and management.
Surface: [commutator, filled area]
Specs: [finish]

List tools and steps. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to sharpen tools such as saws, picks, shovels, screwdrivers, and scoops, either manually or by using bench grinders and emery wheels.

Context: The work draws on mechanical, production and processing and administration and management.
Tools: [blades, saws, picks]
Equipment: [grinder, stones]

List sharpening steps and angles. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to remove and replace defective parts such as coil leads, carbon brushes, and wires, using soldering equipment.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [describe]
Part: [describe]

List diagnosis, removal, replacement and test steps. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to clean cells, cell assemblies, glassware, leads, electrical connections, and battery poles, using scrapers, steam, water, emery cloths, power grinders, or acid.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [instruments, lab gear, tools]
Manual guidance: [cleaning and maintenance steps]

Make a maintenance checklist and log. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to repair and operate battery-charging equipment.

Context: The work draws on mechanical, production and processing and administration and management.
Equipment: [robot, telephone, device]
Fault: [describe]

List diagnosis and replacement steps. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to rewind coils on cores in slots, or make replacement coils, using coil-winding machines.

Context: The work draws on mechanical, production and processing and administration and management.
Part: [describe, material, dimensions]
Process: [cut, shape, roll, weld]

List the sequence, tools, tolerances and inspection points. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to seal joints with putty, mortar, and asbestos, using putty extruders and knives.

Context: The work draws on mechanical, production and processing and administration and management.
Gap or joint: [describe]
Sealant: [type]

List prep, application and cure. Include the tools, materials and safety steps, the measurements or settings to double-check, and a 3-line template for logging the job. Flag anything to confirm in the manufacturer's manual.

I work as an electric motor / power tool / related repairer. Part of my job is to test battery charges, and replace or recharge batteries as necessary.

Context: The work draws on mechanical, production and processing and administration and management.
Circuit or component: [describe]
Tools: [oscilloscope, meter]

List test points and expected values. Group it by area, say what 'good' and 'bad' look like for each item, and add a short template for writing up what I find.